Hitachi 50GX49B - Manual (Page 10)

FRONT PANEL CONTROLS - 10 -
Phono Connector
Used on all standard video and audio cables which
connect to inputs and outputs located on the television's
rear jack panel and front control panel.
S-Video (Super Video) Connector
This connector is used on camcorders, VCRs, and
laserdisc players with an S-Video feature in place of the
standard video cable to produce a high-quality picture.
ANTENNA CONNECTIONS TO REAR JACK PANEL
1. VHF (75-Ohm) antenna/CATV (Cable TV)
When using a 75-Ohm coaxial cable system, connect the outdoor antenna or CATV coaxial cable to the ANT A (75-Ohm)
terminal. If you have a second antenna or cable TV system, connect the coaxial cable to the ANT B terminal.
To outdoor antenna or CATV cable
2. VHF (300-Ohm) antenna/UHF antenna
When using a 300-Ohm twin lead from an outdoor antenna. connect the (VHF or UHF) antenna leads to screws of the
(VHF or UHF) adaptor.Plug the adapter into the antenna terminal on the TV.
To outdoor VHF or UHF Antenna
3. When both VHF and UHF antennas are connected
Attach an optional antenna cable mixer to the TV antenna terminal, and connect the cables to the antenna mixer.
Consult your dealer or service store for the antenna mixer.
FRONT PANEL CONTROLS
FRONT VIEW