Hitachi 50GX49B - Manual (Page 45)

CUSTOM - 45 -
NOTE: 1. If ANT A and ANT B are in the same SIGNAL SOURCE mode (see page 32), when a channel is locked, it is
locked on both antenna inputs.
2. When using TV TIME OUT make sure the clock is set (see page 36).
4 EVENT PROG.
This function will automatically turn the TV on or off, one time only, every day, or once a week.
Press CURSOR to select PROGRAM 1, 2, 3, or 4.
Press CURSOR or to select the time the TV will turn on and off.
Press CURSOR to change position.
Press CURSOR or to highlight then CURSOR to select MODE: ONCE (TV will turn on/off one time only) or
MODE: DAILY (TV will turn on/Off at the same time every day), or MODE: WEEKLY (TV will turn on/off at same time
every week) and MODE: OFF (to disable this function).
Press CURSOR or , or CHANNEL ( ) or ( ), or number buttons to set the channel the TV will tune to when it
automatically turns on.
Press EXIT to quit menu or CURSOR to return to previous menu.
IF the clock is not set, you can not use this function and the screen below will appear.
NOTE: 1. The OFF Timer will only activate if the TV was turned on or tuned with the ON Timer, and no channel
selection was made after this time. If you change the channel after the ON Timer has been activated, the OFF Timer will
deactivate.