Hitachi 50GX49B - Manual (Page 20)

HOW TO USE THE GENIUS REMOTE TO CONTROL YOUR TV - 20 -
button. The remote will now control your cable/satellite box. (See page 26 for instructions on how to program the remote to
control your cable/satellite box.)
(1)These buttons allow the remote to control your TV, VCR, or cable/satellite box depending on which mode is chosen, as
explained above.
(2), (3) LIGHT BUTTON
When you are in a dark room, press the light button (2) on the side of the remote to light up the buttons shown in (3) . The
light will stay on for aobut 8 seconds if the light button is not pressed again. These buttons will not appear to light if the
room is too bright.
(4) PRECODED VCR BUTTONS
These buttons always transmit the chosen precoded VCR codes.
(5) TV/VCR BUTTON
When the remote is in the TV of VCR mode, this is the TV/VCR button. When the remote is in the CABLE mode, this is
the A/B button.
HOW TO USE THE GENIUS REMOTE TO CONTROL YOUR TV