Hitachi 50UX23K - Manual (Page 14)

FRONT PANEL CONTROLS - 14 -
MENU BUTTON
This button allows you to enter the MENU mode without using the remote. It makes it
possible to set TV features to your preference, without using the remote.
AVX (Audio/Video) selector/ENTER button
Press this button to select the current antenna source, VIDEO: 1, 2, or 3. Your selection
is shown in the top right corner of the screen. This button also serves as the ENTER
button when in MENU mode.
VOLUME level
Press these buttons for your desired sound level. The volume level will be displayed on
the TV screen. These buttons also serve as the cursor left and right buttons when in
MENU mode.
CHANNEL selector
Press these buttons until the desired channel appears in the top right corner of the TV
screen. These buttons also serve as the cursor up and down buttons when in MENU
mode.
POWER button
Press this button to turn TV on or off.
POWER light
You will see a red light when the TV is turned on.
NOTE: Your HITACHI TV will appear to be turned "off" if there is no video input when
VIDEO: 1, 2, or 3 is selected. Check the POWER Light to make sure the TV is off when not
in use.
AI (Artificial Intelligence) sensor
This "Artificial Intelligence" sensor will make automatic picture adjustments depending
on the amount of light in the room to give the best picture. (See page 38)
REMOTE CONTROL sensor