Heat & Glo Fireplace Heat-N-Glo 6000XLT-CDN - Manual (Page 39)

39
1. Lift the trim door up
and out of the unit.
EYE BOLT
LATCH BRACKET
GLASS DOOR
Figure 38. Placement of the Ember Material
CAUTION IT IS STRONGLY RECOMMENDED THAT TRIM
DOORS WITH OPTIONAL MESH SCREENS BE
INSTALLED ON PROPANE MODELS.
Figure 36. Models: 6000XLT-CDN and 6000XLS
Glass Assembly
6000ARCH does not have the eye bolts.
1. Place the ember
material onto the
top of the burner.
Figure 37. Model: 6000TR Glass Assembly
1. Lift the top trim door
up and out of the
unit.
2. Unlatch and remove
the glass door from
the unit.