Healthrider H120 HMTL39906.1 - Manual (Page 7)

7
2. Attach two Round Base Pads (57) and an Extension
Leg Pad (61) to the Upright Base (69) and Extension
Leg (63) with four 1" Tek Screws (39) as shown.
63
61
57
69
39
39
39
2
3. Attach a Wheel (66) to the Upright Base (69) with a
Wheel Bolt (64) and a Nut (13) as shown. Do not over-
tighten the Wheel Bolt; the Wheel should turn freely.
With the help of a second person, carefully tip the tread-
mill onto its other side.
66
13
69
64
3
4. Partially fold the Frame (86) so the treadmill is more sta-
ble. Do not fully fold the treadmill until it is com-
pletely assembled.
Hold the Left Upright (7) against the Upright Base (69).
Start a 3" Upright Bolt (21) and a 1" Upright Bolt (76)
with 5/16" Star Washers (95) into the Upright Base and
the Left Upright as shown.
Do not tighten the Bolts
yet.
86
7
4
95
76
21
69