HP 2600 Series - Manual (Page 141)

6-9
Configuring Secure Shell (SSH)
Configuring the Switch for SSH Operation
Configuring the Switch for SSH
Operation
1. Assign Local Login (Operator) and Enable (Manager)
Password
At a minimum, ProCurve recommends that you always assign at least a
Manager password to the switch. Otherwise, under some circumstances,
anyone with Telnet, web, or serial port access could modify the switch’s
configuration.
To Configure Local Passwords. You can configure both the Operator and
Manager password with one command.
Syntax:password < manager | operator | all >
SSH-Related Commands in This Section Page
show ip ssh 6-17
show crypto client-public-key [keylist-str] [< babble | fingerprint >] 6-24
show crypto host-public-key [< babble | fingerprint >] 6-14
show authentication 6-21
crypto key < generate | zeroize > ssh [rsa] 6-11
ip ssh 6-16
key-size < 512 | 768 | 1024 > 6-16
port < 1 - 65535|default > 6-16
timeout < 5 - 120 > 6-16
version <1 | 2 | 1-or-2 > 6-16
aaa authentication ssh
login < local | tacacs | radius | public-key > 6-18, 6-20
< local | none > 6-18
enable < tacacs | radius | local > 6-18
< local | none > 6-18
copy tftp pub-key-file <tftp server IP> <public key file> 6-24
clear crypto client-public-key [keylist-str] 6-25