HONDA HR215SXA - Manual (Page 89)

SPARK ARRESTER SERVICE (optional equipment)
The engine in your lawn mower is not factory-equipped with a spark
arrester. In some areas, it is illegal to operate an engine without a
spark arrester. Check local laws and regulations. A spark arrester is
available from an authorized Honda servicing dealer.
The spark arrester must be serviced every 100 hours to keep it
functioning as designed.
1. Allow the engine to cool, then remove the two nuts from the muffler
shield, using a 10 mm socket wrench.
2. Remove the muffler shield, identification plate, muffler, and gasket.
3. Remove the spark arrester from the muffler.
4. Check for carbon deposits on the spark arrester and the exhaust
port. Brush carbon deposits away. Be careful to avoid damaging
the spark arrester screen. Inspect the spark arrester screen for
breaks or tears and replace if necessary.
5. Install the spark arrester in the muffler.
6. Install the muffler components on the engine, and tighten the two
nuts securely.
GASKET
MUFFLER
MUFFLER
SHIELD
IDENTIFICATION
PLATE
SPARK ARRESTER
SCREEN
ADDITIONAL INFORMATION
87