Lights, 2009 cr- v – HONDA 2009 CR-V User Manual
Page 299
Advertising
Determine which of the four bulbs
is burned out: stop/taillight, back-
up light, turn signal, or side
marker.
Remove the socket by turning it
one-quarter turn counterclockwise.
Use a Phillips-head screwdriver to
remove the taillight assembly
mounting screw under each cover.
Pull the taillight assembly out of
the rear pillar.
Open the tailgate. Place a cloth on
the edge of the cover. Remove the
covers by carefully prying on the
edge with a small flat-tip
screwdriver.
2.
3.
4.
5.
1.
CONTINUED
Replacing Rear Bulbs
Lights
Ma
int
e
na
nce
295
BULBS
COVER
SCREWS
BULBS
2009 CR- V
Table Of Contents
Main Menu
Advertising
This manual is related to the following products: