HONDA 2009 CR-V - Manual (Page 48)

Place the child seat on the vehicle
seat, then attach the seat to the
lower anchors according to the
child seat maker’s instructions.
Some LATCH-compatible seats have
a rigid-type connector as shown
above.
Other LATCH-compatible seats have
a flexible-type connector as shown
above.
Whatever type you have, follow
the child seat maker’s instructions
for adjusting or tightening the fit.
Remove the dual deck cargo shelf
(see page
).
Remove the head restraint (see
page
). Make sure the
removed head restraint is secured
in the cargo area.
Reinstall the head restraint when the
child seat is removed.
5.
4.
3.
6.
114
98
If equipped
Installing a Child Seat
44
Flexible type Rigid type
2009 CR- V
Table Of Contents Main Menu