Hypertec PCI 10/100 TX - Manual (Page 2)

interference in which case the user will be required to correct the interference at
his own expense.
European Community (EC) Electromagnetic Compatibility
Directive.
This equipment has been tested and found to comply with the protections
requirements of European Emission Standard EN55022 and the Generic
European Immunity Standard EN50082-1. This equipment is designed to operate
in a domestic environment and as such is tested to the EN55022 ITE domestic
emissions limit. The domestic immunity standard EN50082-1 calls for the
following basic standards:
(a) IEC 801-2 Electrostatic Discharge
(b) IEC 801-3 RF Immunity
(c) IEC 801-4 Transient Burst
Copyright
This document and all material contained within it are copyrighted. The document
may not, in whole or part, be copied, photocopied, reproduced, translated, or
reduced to any electronic medium or machine readable form without prior written
consent from HYPERTEC.
HYPERTEC reserves the right to make modifications to the product without
notification. Hypertec is a trademark and the Hypertec logo is a registered
trademark of HYPERTEC. All other brand and product names included herein
may be trademarks of the respective companies.
©1999 Hypertec, Ltd. All rights reserved.