HP KAYAK XU800 - Manual (Page 12)

Your PC Workstation Does Not Start Correctly
Case 2 — Monitor Is Blank
12
NOTE If the monitor goes blank or becomes corrupt during a Windows boot, refer to “Case 5
— Screen Goes Blank or Corrupt Image” on page 22.
Dual monitor or multi-monitor configuration problem
If you have a dual monitor video card
installed, but only one monitor, check that
it is connected to Output 1. • The outputs are labelled on the video card.
If you have two or more video cards
installed, but only one monitor. • Plug the monitor in one of the video outputs on the second
video card.
One monitor is blank. Multi-monitor configuration and resolution
have been correctly defined. 1 Access Display Properties through Start, Settings,
Control Panel.
2 Select the multi-monitor option and configure for the required
number of monitors and resolution.
Symptom... Check that... How...
Yits.bok Page 12 Friday, December 17, 1999 11:33 AM