haier GDZ22-1 - Manual (Page 8)

7
English
Your dryer also has the following features for your convenience:
Dry Sensor: (feature only active in auto dry cycle)
• This senses the dampness in the clothes. The dryer will automatically
shut itself off once it senses that the clothes are dry.
End of Cycle Signal:
• Your dryer is equipped with an audible signal that will alert you every
time the dryer load is finished drying.
Lint Filter:
• All dryers come with a lint filter that needs to be cleaned before or after
every use (read “Care and Cleaning Guide” Section).
Leveling Legs:
• Your dryer has four leveling legs which are located in the front and rear
corners of your dryer. After properly placing your dryer in its final
position, you can level your dryer.
• Leveling legs can be adjusted by turning them clockwise to raise your
dryer or by turning them counterclockwise to lower your dryer.
Reversible Door:
Your dryer is designed so the door swing may be reversed at any time
without additional parts. Conversion is accomplished by transferring
hinges to the opposite side of the cabinet.
1. Open the dryer door.
Remove the four hinge hole
plugs from the left side of
the door opening.
2. Remove the four screws
that secure the door hinges
to the dryer.
3. Rotate the door 180˚ and
reinstall the door hinges to
the dryer front panel with
the four screws.
4. Install the four hinge hole
plugs in the open screw
holes on the right side of
the door opening.
Other Features
REMOVE 4 SCREWS
(ONE FROM EACH HINGE FIRST)
ROTATE THE DOOR 180˚
GDZ22-1 manual 10/22/01 11:45 AM Page 8