Harbor Freight Tools DRILL MASTER 97626 - Manual (Page 6)

Page 6 For technical questions, please call 1-800-444-3353. SKU 97626
Grounding
tO pREVEnt ElECtRiC ShOCK anD DEath FROm
inCORRECt GROunDinG WiRE COnnECtiOn:
Check with a qualified electrician if you are in doubt as to whether the
outlet is properly grounded. Do not modify the power cord plug provided
with the tool. Do not use the tool if the power cord or plug is damaged.
if damaged, have it repaired by a service facility before use. if the plug will not fit the
outlet, have a proper outlet installed by a qualified electrician.
Figure a: Outlets for 2-prong plug
This tool’s power adapter may be used in
either of the 120 volt outlets shown in the
preceding illustration. (See Figure a.)
Extension Cords
note: Extension cords must not be used with this item’s power adapter.
Symbology
table a: Symbology
Double Insulated
Canadian Standards Association
Underwriters Laboratories, Inc.
V~
Volts Alternating Current
a
Amperes
table a: Symbology
n0 xxxx/min. No Load Revolutions per Minute (RPM)
WARNING marking concerning Risk
of Eye Injury. Wear ANSI-approved
safety goggles with side shields.
Read the manual before
set-up and/or use.
WARNING marking
concerning Risk of Fire.
Do not cover ventilation ducts.
WARNING marking concerning
Risk of Electric Shock.
Maintain Power cord properly.
Sa
FE
tY
Op
ER
ati
O
n
m
aint
Enan
CE
SE
tup