Harbor Freight Tools DRILL MASTER 97626 - Manual (Page 9)

Page 9 For technical questions, please call 1-800-444-3353. SKU 97626
General Operating instructions
1. Plug the Power Adapter into a standard,
grounded 120V electrical outlet.
2. Connect the Rotary Tool to
the Power Adapter.
3. Turn the Power Switch “ON” and
allow the Rotary Tool to come up to
full speed before beginning work.
4. Contact the material lightly. Do not press
hard on the tool while working;
allow the tool to work at its own pace.
It is better to make several shallow
passes than to make one deep pass.
5. To prevent accidents, turn off the tool and
disconnect its power supply after use.
Clean, then store the tool indoors
out of children’s reach.
Sa
FE
tY
Op
ER
ati
O
n
m
aint
Enan
CE
SE
tup