Harbor Freight Tools DRILL MASTER 97626 - Manual (Page 7)

Page 7 For technical questions, please call 1-800-444-3353. SKU 97626
Specifications
Tool Input 12VDC
Adapter Input 120V~ / 60Hz
Rotation Speed 16,000 RPM
Collet Size 1mm, 3mm, 3/32″, and 1/8″
Setup - Before use:
Read the EntiRE impORtant SaFEtY inFORmatiOn section
at the beginning of this manual including all text under
subheadings therein before set up or use of this product.
Functions
lock Button
power Switch 1/8″ Shank with
Buffing Wheel
Collar
accessories
note: Refer to Parts List and Diagram on page 11 for accessory illustrations.
• Use the Diamond Burr Bits (4) to drill
hard, brittle materials, such as tile.
• Use the mounted Stones (5) for
sharpening cutting tools, screwdrivers etc,
deburring metal after cutting, and removing
excess material on metal and ceramics.
• Use the Sanding Drums (6) to smooth
out rough areas on soft materials.
• Use the Cut-off Wheels (7) for cutting,
carving and slotting materials.
• Use the Buffing Wheels (8) for polishing.
• Use the Wire Wheels (9) to clean
dirty or rusted surfaces.
• Use the Whet Stone (10) for sharpening.
• Use the Drill Bits (11) to bore small holes.
• mandrels are the shanks with
a threaded or screw head.
Use them with the cut-off wheels,
polishing wheels, and sanding discs.
The shank without threads on the
end is for the felt polishing wheels.
Sa
FE
tY
Op
ER
ati
O
n
m
aint
Enan
CE
SE
tup