Configuring print options, Setting the print defaults – HP 9100 series User Manual
Page 121
ENWW
Configuring print options 119
Configuring print options
This section contains information about the following topics.
z
Setting the print defaults
You can set the following defaults for print jobs in the embedded Web server:
z
Tray that will be used and the paper size and paper type for each tray
z
Automatic sensing of media type (on or off)
z
Print speed
You can set the following defaults for print jobs from the control panel:
z
Number of copies that will print
z
Paper size, paper type, paper quality, and paper-size overrides
z
Duplexing (on or off)
z
Tray that will be used and the paper type and paper size for each tray
z
Automatic sensing of media type (on or off)
z
PCL font characteristics
z
Printing of PostScript errors (on or off)
z
Unattended printing (on or off)
z
Personality
Note
Settings in a software program (for example, media size) always take precedence over settings
in the printer driver or the control panel.
Settings in a printer driver always take precedence over settings in the control panel.
To set the print defaults
z
Embedded Web server (network connection)
Open the embedded Web server, click the Settings tab, and then click Paper Handling in
the left pane.
z
Control panel
Press M
ENU
and use the options on the
PRINTER
menu.