Setting defaults for all print jobs, Select the correct print queue – HP 9100 series User Manual
Page 61
ENWW
Setting defaults for all print jobs 59
Select the correct print queue
Make sure that the print queue settings are correct for your operating system and connection
type.
z
For Macintosh computers connected directly to a computer with a USB cable using
CommApp, use the Officejet 9100 series Printer print queue for Mac OS 9. For Mac OS
10, use the Officejet 9100 series (Printer) print queue.
z
For Macintosh computers connected to a network (IP printing only) using CommApp, use
the xxx.xxx.xxx.xxx OJ9100 print queue. For Mac OS 10, use the Officejet 9100
series@macaddress print queue.
z
For Macintosh computers connected to a network (IP printing), without using CommApp,
use the xxx.xxx.xxx.xxx OJ9100 - NET print queue. For Mac OS 10, use the Officejet
9100 series@macaddress - NET print queue.
Setting defaults for all print jobs
You can set defaults for the all-in-one that will apply to all print jobs. For example, you can set
the default number of copies that print and the default tray that is used.
See
for an explanation of the options.
Note
Settings in a software program and in the printer driver (for example, media size) always take
precedence over settings made from the control panel.
To set defaults from the printer driver (Windows computers)
1
From the Windows desktop, use one of the following methods to open the printer driver.
• Windows 98, Windows Me, Windows NT 4.0, and Windows 2000:
Click Start, point to Settings, and then click Printers.
• Windows XP:
Click Start, and then click Printers and Faxes.
Or, click Start, click Control Panel, and then click Printers and Faxes.
2
Right-click the all-in-one icon, and then click the option for your operating system:
• Windows 98 and Windows Me: Click Properties.
• Windows NT 4.0: Click Document Defaults or Properties.
• Windows 2000 and Windows XP: Click Printing Preferences or Properties.
3
Change the settings, and then click OK.