Hitachi CP-X205 - Manual (Page 105)


1) Enter "http://192.168.1.10/" into the address bar of the web browser.
 (QWHUWKH$GPLQLVWUDWRU,'DQGSDVVZRUGDQGFOLFN[Logon].
 &OLFN[Port Settings] on the main menu.
4) Click the [Enable] check box to open 1HWZRUN&RQWURO3RUW 3RUW  to use
7&3&OLFNWKH[Enable] check box for the [Authentication] setting when
authentication is required, otherwise clear the check box.
 &OLFNWKH[Enable] check box to open 1HWZRUN&RQWURO3RUW 3RUW   to
XVH7&3 &OLFNWKH[Enable] check box for the [Authentication] setting
when authentication is required, otherwise clear the check box.
 &OLFNWKH[Apply] button to save the settings.
&RPPDQG&RQWUROYLDWKH1HWZRUN
Command Control via the Network
<RXFDQFRQ¿JXUHDQGFRQWUROWKHSURMHFWRUYLDWKHQHWZRUNXVLQJ56&
commands.
Communication Port
The following two ports are assigned for the command control.
7&3
7&3 
&RPPDQG&RQWURO6HWWLQJV
&RQ¿JXUHWKHIROORZLQJLWHPVIURPDZHEEURZVHUZKHQFRPPDQGFRQWUROLVXVHG
Example: If the IP address of the projector is set to 192.168.1.10:
‡&RPPDQGFRQWUROLVQRWDYDLODEOHYLDFRPPXQLFDWLRQSRUW 7&3  
(
9 WKDWLVXVHGIRUWKHH6+27WUDQVPLVVLRQIXQFWLRQ
NOTE