Hitachi CP-X205 - Manual (Page 106)


&RPPDQG&RQWUROYLDWKH1HWZRUN
Command Control Settings (Continued)
When the authentication setting is enabled, the following settings are required.
(
17)
7) Click [Security Settings] on the main menu.
8) Click [Network Control] and enter the desired authentication password.
 &OLFNWKH[Apply] button to save the settings.
‡7KH$XWKHQWLFDWLRQ3DVVZRUGZLOOEHWKHVDPHIRUNetwork Control
3RUW 3RUW  , 1HWZRUN&RQWURO3RUW 3RUW   , and Image Transfer
Port (Port: 9716).
NOTE
‡7KHQHZFRQ¿JXUDWLRQVHWWLQJVDUHDFWLYDWHGDIWHUUHVWDUWLQJWKHQHWZRUN
FRQQHFWLRQ:KHQWKHFRQ¿JXUDWLRQVHWWLQJVDUHFKDQJHG\RXPXVWUHVWDUW
the network connection. You can restart the network connection by clicking
[Network Restart] on the main menu.