HONDA HF2315SBE - Manual (Page 30)

EN 29 HOW TO USE
5.4.3 B
RAKING
First, reduce the machine’s speed by reducing the engine’s r.p.m. and then push
the brake pedal (
☛ 4.21 or 4.31) to further reduce the speed until the machine
stops.
The machine already slows down considerably by just
releasing the drive pedal in forward or reverse.
5.4.4 R
EVERSE
Reverse must be engaged ONLY when the machine is stopped.
Push down the pedal until the machine stops and then insert reverse by mov-
ing the lever sideways and putting it into position «R» (
☛ 4.22). Gradually
release the pedal to engage the clutch and then begin moving in reverse.
When the machine is stopped, start the reverse movement by pressing the
drive pedal in the «R» direction (
☛ 4.33).
5.4.5 G
RASS
-
CUTTING
When you have reached the area to be mowed, make sure that the grass-catcher
or stone-guard is positioned correctly
The cutting deck wheels (1) are included so that a space is always kept
between the ground and the edge of the cutting deck to prevent the lawn dam-
age if the ground is uneven.
Each cutting deck wheel can be fitted at two different heights: it serves to main-
HF26••
◊••
HF24••
◊•• ➤
HF2•••HTE HF2•••HME
➤
HF2•••SBE
➤
NOTE
HF2•••HTE HF2•••HME
➤