HONDA HF2315SBE User Manual
Page 54
EN 53
MAINTENANCE
5. Install the new oil filter on the filter base and tighten it by hand until the O-ring
seats against the filter base.
6. Tighten the oil filter to the specified torque (12 Nm - 1.20 kgm).
Use only a Honda genuine oil filter or a filter of equivalent
quality specified for your model. Using the wrong Honda filter or a non-Honda
filter which is not of equivalent quality may cause engine damage.
7. Pour the specified amount of recommended oil into the engine. Start the
engine and check the filter for leaks.
8. Stop the engine and recheck the oil level. If necessary, add oil to bring it up to
the proper level.
Ask your authorized Honda dealer for advice on the filter
wrench (special tool).
6.4.3 A
IR CLEANER SERVICE
Never use gasoline or low flash point solvents for cleaning
the air cleaner element. A fire or explosion could result.
̆
!
WARNING!
NOTE
IMPORTANT
1
2
3
1
2
3
4
HF2620
◊••
➤
HF24••
◊••
HF23••
◊••
➤