HONDA HF2315SBE User Manual
Page 46
Advertising
EN 45
MAINTENANCE
ing it out towards the left so that all the
pins come out of their positions.
When assembling, perform the opera-
tions described above in reverse while
making sure that the front terminal of
the collector channel properly fits into
the exit of the cutting deck.
Put the cutting height adjustment lever
into the notch at position "1".
Only for
:
release the spring (1) of the blade
engagement.
Loosen the engagement cable register
(2) and extract it from the seat.
Shift the mobile guide pulley (3) back-
wards just enough to free the belt (4)
from the motor pulley (5).
Remove the two cotter pins (6) from the
two front connecting rod pins (7), with-
HF24••
◊••
➤
HF26••
◊••
HF24••
◊••
➤
10
10
1
2
4
5
3
9
8
7
8
6
8
7
8
9
6
Advertising