HP 4 FAMILY - Manual (Page 141)

HP LaserJet 6P/
6MP Printers
The HP LaserJet 6P and 6MP printers are similar to the
LaserJet 5P and 5MP printers, with the addition of higher
performance and faster print speed (up to 8 ppm). The PCL
5 feature set is identical to the LaserJet 5P/5MP printers,
with the exception that the LaserJet 6P/6MP printers
support some additional paper sizes (A5, JIS B5, JIS B4,
and Oufuku-Hagaki postcards).
The HP LaserJet 6MP printer also includes the Adobe
PostScript Level 2 printer language with 35 additional
built-in PostScript fonts.
HP LaserJet 5Si
Mopier
The HP LaserJet 5Si Mopier combines the performance and
network strengths of the LaserJet 5Si/5SiMx printers with
the ability to print, collate, and staple multiple copies of a
document. The LaserJet 5Si Mopier has the same PCL
feature set as the LaserJet 5Si/5Si printers, but allows you
to download a document just once and then print as many
originals as you need.
Multiple-original printing (“mopying”) and stapling is
accomplished using PJL commands. The application soft-
ware, using PJL commands, determines to which output
bin the printed copy will be delivered. If the stapling bin is
selected, the job is automatically stapled.
Note Multiple mopies are produced using the PJL SET QTY
command. In order for the mopier to produce more than one
original of a print job, the PCL number of copies command
(?&l#X) must not be included in the data stream, since this
command will limit the job to one copy or produce multiple
uncollated copies.
See the PJL Printer Job Language Technical Reference
Manual for a PJL example of printing to the mopier.
Printer-Specific Differences 2-105