haier HWM70-98 - Manual (Page 11)

Laundry quantity(kg) Water level Water quantity
Common powder
(add 40g in each 30L water)
1.0below
About 60L About 80g About 50g
About 70L About 93.3g About 58.3g
About 54L About 72g About 45g
About 66L About 88g About 55g
About 42L About 56g About 35g
About 48L About 64g About 40g
About 30L About 40g About 25g
About 36L About 48g About 30g
About 18L About 24g About 15g
About 24L About 32g About 20g
Water level, water quantity and dosage of the washing powder
Washing powder inlet entrance
Softener inlet entrance
Using process Using process
2 Usage of the detergent
Add the washing powder or softener into the detergent box
directly as indicated in the left figure.
After adding washing powder ,please close the detergent box.
See to following table for the dosage of the washing
powder.
How to use the whitener
Fill water to decided level .Dilute the whitener with
container. Pour it slowly into the washing tub.
Avoid using whitener on laundries with colour or
pattern as they are prone to lose colour.
The whitener shall not touch the laundries directly.
Refer to the user's manual for the usage and
quantity of the whitener.
For powder whitener, please dissolve it before use.
How to use the washing powder
Direct dissolved in the machine(not applicable for fuzzy
and reserve programs)
1.Fill small quantity of water.
2.Add the power. Run for 30 seconds to dissolve
it completely.
3.Put in the laundries. Select suitable water level.
Washing powder with poor quality or not used for a long
period may get blocked. Please clean the detergent box
in time.
It is suggested not to use high sudsing detergent.
Please add the powder according to the laundry quantity,
water level and water quantity.
The instant dissolving of the washing powder:
1. Prepare warm water of 30
and a container.
2. Add the powder while stirring to fully dissolve it.
It is suggested to use liquid detergent when you
use QUICK WASH.
Concentrated powder
(add 30g in each 30L water)