haier HWM70-98 - Manual (Page 13)

WATER
LEVEL
START
PAUSE
POWER
ON/OFF
PROGRAM
RESERVE
Reserve(hours later)
Time remained(minutes)
FIBRE
COTTON
WOOLLEN
SILK
QUICK
POSTHASTE
JEANS
Page 16
10
8
6
4
2
9
7
5
3
1
NORMAL
Using process Using process
This function is used to protect the children and prevent them from changing the
washing procedure.
Push and hold the WATER LEVEL button and SPIN button, then push down the
POWER ON/OFF button. The digitron displays CL . You can continue setting desired
washing procedures. After setting, push down the START/PAUSE button. The child
lock function is activated.All of the buttons are locked and cannot make selection.
Release the child lock function: push down the WATER LEVEL and SPIN button at
the same time for more than 1 second. After a beep sound, the child lock function is released.
Child lock function
Push the POWER ON/OFF button to switch on
the power. When the power is on, push it again
to switch off the power.
Push the POWER ON/OFF button to switch on
the power. If the START/PAUSE button is not
pushed, the washing machine will automatically
switch off the power after 5 minutes.
Power On/Off button
During sensing, it displays --
During reserve procedure, it displays the remained reserve time (in hour)
During operation of programs, it displays the remained time (minute). If the remained time exceeds 99 minutes,
it adopts A at tens place to represent 100 minutes, b to represent 110 minutes. For instance, A3 represents 103 minutes.
In case of abnormal phenomenon, it displays the abnormal symbol (see to Page 16)
Reserve/remain time indicator digitron
In normal operation mode,
the reserve indicator light
is off. The time remain
indicator light is on. The
digitron displays the time
remained (in minute)
before the washing is
finished.
Push down the RESERVE
button. The reserve
indicator light is on ,The
digitron displays the reserve
time of finishing washing
(in hour).When the machine
is started, the reserve
indicator light is on,
indicating that the reserve
function is running.
RERSERVE button
The washing machine can detect the laundries automatically.
After detection, it will set the water level to suitable value
among 4, 6, 8,and 10 automatically.
You can also set water level by self. After the machine
is started, it will not set water level automatically. You shall
push the START/PAUSE button to make new setting.
If there's water inside the tub, the machine cannot detect the
laundries and will display water level 6 .
If wet laundries are put in, it may display water level 10 . You
must set suitable water level by yourself.
If POSTHASTE program is selected, it will display water
level 3 . When water level 2 is reached in water filling, it will
perform washing while filling water. When water level 3 is
reached, it will change to normal washing.
During operation of wash and rinse program, you can push
down the water level button to add water. When you release
the button, or it reaches the overflow water level, the machine
will stop adding water. The water level decided may be
different from actual value because of the different moisture
level of the laundries.
WATER LEVEL button
Start/Pause button
After the power is switched on, push it to
Start the machine
During working, push it to pause working.
During pause, push it to resume working.
PROGRAM selection button
Following automatic programs are available for selection
Program Applicable situation
Normal Common washing
Quick Quick and high-efficiency wash for
common laundries
Posthaste Super quick wash of the laundry
under 1 kg with light soil
Jeans Washing the relatively big and thick laundriesr
Fibre Washing the chimical fiber laundries
Cotton
Woollen
Silk
Washing the cotton textiles
Washing the woolen textiles
Washing the textile