Section 2 getting started, Section 2, Getting started – HP V5020U User Manual

Page 5: Loading the battery, Charging the battery

Advertising
background image

5

EN

Section 2

Getting Started

Loading the Battery

Before using the camcorder, you must load the Lithium-ion
rechargeable battery.

Slide the latch at the bottom to remove cover.

1.

Insert the battery following to the correct polarity marks

2.

( + or -).
Replace the battery cover.

3.

Note

When the battery is absent, the date and time will

•

be reset.

Charging the Battery

For optimal flexibility, this camcorder can be recharged using the USB port of most PCs/laptops or with
the AC adapter provided in the packaging.

Recharging from a PC/Laptop USB port

Be sure the PC or Laptop is powered up before beginning. Connect the camcorder to the PC/Laptop

1.

USB port using the provided USB cable as illustrated below.
This should display the [PC Mode] and [Charge Mode]menu on the camcorder LCD. Use the Tele/

2.

Wide buttons ( /

) to highlight [Charge Mode].

Press the Record/OK button (

3.

) to select the option. Shortly after, the camcorder will display a

charging battery icon on the LCD. The LCD will turn off after 3 seconds.
Please allow 5 to 9 hours for a full charge. After charging, disconnect the camcorder from the USB

4.

cable for normal use.

Press OK Key

Advertising