Home Dynamix DW 3512 - Manual (Page 22)

Dynamix DW 3512 Technical Manual V1.00
Copyright © 2007 Dynamix Pro., Ltd. All right reserved. 22
1) WEP: When encryption WEP is selected, you must set WEP key value. Only user with the
same WEP key can connect to the DW3512.
•
Key Length: set WEP key length as 64 or 128 bits and select user to transmit data
using 64 or 128 bits WEP key encryption. 64 bits represents a lower level encryption
for security, and uses ASCII (5 characters) or Hex (10 characters) encryption
scheme as a secret key. 128 bits represents a higher level encryption for security,
and uses ASCII (13 characters) or Hex (26 characters) encryption scheme as a
secret key.
•
Key Format: set key format as ASCII (5 characters) or Hex (10 characters) for 64
bits encryption; ASCII (13 characters) or Hex (26 characters) for 128 bits encryption.
•
Default Tx Key: set default key as key 1, 2, 3, or 4. User can specify which of the
four keys to use for transmitting data over WLAN.
•
Encryption Key 1/2/3/4: user can set 4 sets of encryption keys. Keys 1-4 allow you to
easily change wireless encryption settings to maintain a secure network. WEP key is
either 5/10 or 13/26 ASCII/hexadecimal characters based on user select 64 or 128
bits key length.
2) WPA(TKIP): only user with the same WPA pre-shared key can connect to DW3512 and
transmit data using TKIP encryption.
•
Pre-Shared Key Format: Select Pre-Shared Key Format as Passphrase or Hex (64
characters).