Home Dynamix DW 3512 - Manual (Page 34)

Dynamix DW 3512 Technical Manual V1.00
Copyright © 2007 Dynamix Pro., Ltd. All right reserved. 34
5) Enable Ping Access on WAN: If this function is checked to enable, user can reach
DW3512 via Ping WAN IP address.
6) Enable Web Server Access on WAN: If this function is checked to enable, user can enter
Web Server management of DW3512 through WAN IP address.
7) Enable IPsec pass through on VPN connection: check to enable IPsec function.
8) Enable PPTP pass through on VPN connection: check to enable PPTP pass through
function.
9) Enable L2TP pass through on VPN connection: check to enable L2TP pass through
function.
¾ PPPoE: Set WAN interface as PPPoE mode.
1) User Name: Set user name of PPPoE connection.
2) Password: Set password of PPPoE connection.
3) Service Name: Set Service Name of PPPoE for description.
4) Connection Type: Set PPPoE connection type to be Continuous/ Connect on Demand/
Manual. If user set type as Continuous, DW3512 will keep trying to connect to server