Home Dynamix DW 3512 User Manual
Page 66
Dynamix DW 3512 Technical Manual V1.00
Copyright © 2007 Dynamix Pro., Ltd. All right reserved.
66
¾
Step4: Go to the page of Wireless
Æ Basic Settings, set the mode to Client and set the
Network Type to Infrastructure.
¾
Step5: Go to the page of Wireless
Æ Security, to set the necessary authentication method for
WISP Outdoor AP, if WISP Outdoor AP has enable authentication.
¾
Step6: Go to the page of Wireless
Æ Site Survey to search and connect to WISP Outdoor AP.
When connection is OK, there should be a successful message appeared.
¾
Step7: Go to the page of TCP/IP
Æ WAN to configure the IP settings.
¾
Step8: Go to the page of Wireless
Æ Basic Settings, enable the “Enable Universal Repeater
Mode (Acting as AP and client simultaneouly)” and input the WISP Outdoor AP’s SSID.
¾
Step9: If configuration ok, PCs of office LAN could send packets via WISP Outdoor AP. And
the Notebook of the DW3512’s WLAN should be also use WiFi to access internet via WISP
Outdoor AP.