Hitachi VT-FX602S - Manual (Page 23)

PRESET FOR USE - 23 -
CH02
TUNER SET UP
• The VCR distinguishes between standard TV channels and cable
channels.
7 After scanning
The tuner stops on the lowest memorized channel. The TV screen returns
to TV mode.
CH 02
• If you subscribe to CABLE TV, "CATV" appears on the display.
• If "TUNER SET UP" appears on the TV screen again, check the cable
connections. Then, press SELECT button once again. The VCR will begin
preset again.
• If the VCR cannot find the local PBS station at step 1, after scanning
channels, "AUTO CLOCK" flashes on the TV screen. And the VCR search
the local PBS station for auto clock setting again. If current time does not
appear, follow "SETTING THE CLOCK" (page 16).
Note: The VCR will search through all the available channels from the lowest
channel. It must scan each channel for one minute to determine if that channel is
transmitting the EDS signal. If the highest channel has EDS signal, it takes many
times. To cancel this search, press MENU button. Then, follow "SETTING THE
CLOCK" (page 16).
• If you use DAYLIGHT-SAVING TIME when current time appears, follow
"DAYLIGHT-SAVING TIME" (page 16).
TO RECALL A DESIRED CHANNEL
You can select the desired channel by using CHANNEL (or CH/SET) or