Hitachi VT-FX602S - Manual (Page 41)

SPECIAL PLAY BACK - 41 -
NOTE: When noise lines appear on the still picture, change to slow mode and
adjust tracking as described in Slow Tracking.
SPECIAL PLAY BACK
Make sure...
• VCR power must be turned on.
• Turn on the TV and set the TV channel to the same video output channel
as located on the back of the VCR. (CH 3 or 4)
• Press VCR/TV button on the remote control so that "VCR" appears on
the display.
• You must use the remote control for the following procedure.
AUTO REPEAT PLAYBACK
The VCR has the auto repeat function that allows you to repeat a tape
indefinitely without touching the Play button.
• Insert a prerecorded tape.
1 Select the main menu
Press MENU button.
2 Select "VCR SET UP"
Press CH/SET
or button repeatedly to point to "VCR SET UP".
Then, press SELECT button.
MENU
TIMER
PROGRAMMING
VCR SET UP
INITIALIZE
3 Select "REPEAT PLAY"
Press CH/SET
or button repeatedly to point to "REPEAT PLAY".
VCR SET UP
TAPE
SELECT ~T130
REPEAT PLAY
RENTAL
AUTO
RETURN