Hitachi 308640 - Manual (Page 4)

4 308640
Installation
KEY
A Air Line Filter
B Air Line Lubricator
C* Bleed-type Air Shutoff Valve
D Pump Air Regulator
E* Fluid Drain Valve
F Fluid Shutoff Valve
G Fluid Filter
H* Grounded Fluid Hose
J Pump
K Air Line
L Air Pressure Regulator
M Pump Fluid Inlet
N In-line Fluid Filter
P Pattern Adjustment Valve Knob
Q* Fluid Pressure Regulator
R Pressure Gauge
S Trigger Safety
T Pump Runaway Valve
V* Pump Ground Wire
W Gun Fluid Connector
X Air Shutoff Valve
*Equipment required for safe operation of the
system. Must be purchased separately.
Fig. 1
C
A
D
C B T
J
V
F
Q
R
G
E
M
H
L
X
K
N
W
S
P
E
05986
Typical Installation
The typical installation shown in Fig. 1 is only a guide
for selecting and installing air-assisted spray systems.
It is not an actual system design. Contact your Graco
distributor for assistance in designing a system to meet
your needs.
Ventilate the Spray Booth
WARNING
TOXIC FLUID HAZARD
To prevent hazardous concentrations of
toxic and/or flammable vapors, spray
only in a properly ventilated spray booth.
Never operate the spray gun unless ventilation
fans are operating.
Check and follow all of the National, State and
Local codes regarding air exhaust velocity require-
ments.