HP DL980 G7 - Manual (Page 105)

Troubleshooting 105
Possible causes:
• Improperly seated or faulty internal or external component
• Unsupported component installed
• Redundancy failure
• System overtemperature condition
Item See
1 • "Integrated Management Log" or in the HP ProLiant Servers
Troubleshooting Guide located on the Documentation CD or see
"Troubleshooting resources (on page 90 )"
• "Event list error messages" in the HP ProLiant Servers Troubleshooting
Guide located on the Documentation CD or see "Troubleshooting
resources (on page
90 )"
2 "Component identification (" Server component identification " on page 7 )"
3 "Server health LEDs"
4 System Management Homepage ( https://localhost:2381 )
5 "Power-on problems flowchart (" Server power-on problems flowchart " on
page 98 )"
6 "HP Insight Diagnostics (on page 85 )" or in the HP ProLiant Servers
Troubleshooting Guide located on the Documentation CD or see
"Troubleshooting resources (on page 90 )"
7 • "Hardware problems" in the HP ProLiant Servers Troubleshooting
Guide located on the Documentation CD or see "Troubleshooting
resources (on page 90 )"
• Server maintenance and service guide, located on the Documentation
CD or the HP website
(
http://www.hp.com/products/servers/platforms )
8 • "Smart Array SCSI Diagnosis feature" or in the HP ProLiant Servers
Troubleshooting Guide located on the Documentation CD or see
"Troubleshooting resources (on page
90 )"
• Server maintenance and service guide, located on the Documentation
CD or the HP website
(
http://www.hp.com/products/servers/platforms )
• "HP contact information (on page 120 )"