Honeywell HCM-6009 - Manual (Page 6)

6
Manual Control Operation (Models HCM-6009, HCM-6011i, HCM-6011WW) (Continued)
A D V A N C E D M I S T ™ H U M I D I S T A T
The Advanced Mist ™ Humidistat allows you to adjust and select the
humidity level to your personal preference. Your humidifier will turn
on and off throughout the day and night to maintain the desired
humidity level you have selected.
H O W T O S E T T H E H U M I D I S T A T
First, turn the humidifier on and select your output/speed level.
Set the Advanced Mist
™ Humidistat on High by turning the knob
clockwise to the end (Fig. 5).
• Let the humidifier run on high for a least one hour or until your
room has reached a comfortable humidity level.
• At this point, slowly turn your Humidistat knob counter-clockwise until the humidifier shuts off and
the Desired Humidity light illuminates (Fig. 6).
• Now that your Humidistat knob is set, the humidifier will automatically turn back on when your room
drops below your comfort setting and will automatically turn off again when the setting is reached.
NOTE: If the humidifier fan will not start or restart when you select a fan speed, the Advanced Mist ™
Humidistat may be set too low. Turn the dial clockwise to the end (Fig. 5). The Desired Humidity light
will turn Off when the unit is producing moisture. When the Desired Humidity light turns ON, you have
reached optimal humidity.
I O N I Z E R F E A T U R E (HCM-6011i & HCM-6011WW Only)
The ionizer helps freshen the air.
• Press the Ionizer button once to start; the Ionizer light will illuminate. Note: The unit must be turned on
for the Ionizer to function.
• To turn off the ionizer, simply press the ionizer button again; the ionizer light will turn off.
NOTE: The ionizer automatically turns off when the desired humidity is reached (your desired humidity
light will be illuminated, see Fig. 6). It will turn back on again when your humidifier restarts.
Fig. 6 Power Light
(Illuminated)
Desired
Humidity Light
(Illuminated)
P O W E R
CAUTION: DO NOT PLUG IN THE HUMIDIFIER WITH WET
HANDS AS AN ELECTRICAL SHOCK COULD OCCUR.
• With the power OFF, plug the filled humidifier into a polarized
120V outlet. DO NOT FORCE THE POLARIZED PLUG INTO THE
OUTLET; it will only fit one way.
S T E P 1 : P O W E R
• Press the Power button to start the humidifier. Your humidifier will
automatically start on High power, Continuous Mode (Fig. 7).
• To turn your humidifier OFF simply press the Power button again.
Fig. 7
Fan Speed
Control
Humidistat
Control
Power
Button
Ionizer
Button
EasySet ™ Control Operation (Model HCM-6013i)
Ionizer
Button
QuietCare_Console_OM_Rev1.qx 8/25/06 1:32 PM Page 6