Instrument panel indicators – HONDA 2010 Civic Sedan User Manual

Page 65

Advertising
background image

If equipped

If equipped

This indicator normally comes on for
a few seconds when you turn the
ignition switch to the ON (II)
position.

If it comes on and stays on at any
other time, or if it does not come on
when you turn the ignition switch to
the ON (II) position, there is a
problem with the VSA system. Take
your vehicle to a dealer to have it
checked. Without VSA, your vehicle
still has normal driving ability, but
will not have VSA traction and
stability enhancement. See page

for more information on the

VSA system.

This indicator has three functions:

It comes on as a reminder that you
have turned off the vehicle
stability assist (VSA) system.

It flashes when VSA is active (see
page

).

It comes on along with the VSA
system indicator if there is a
problem with the VSA system.

This indicator normally comes on for
a few seconds when you turn the
ignition switch to the ON (II)
position. See page

for more

information on the VSA system.

This indicator normally comes on
when you turn the ignition switch to
the ON (II) position and goes off
after the engine starts. If it comes on
at any other time, there is a problem
in the electric power steering system.
If this happens, stop the vehicle in a
safe place, and turn off the engine.
Reset the system by restarting the
engine. The indicator will not turn
off immediately. If it does not go off
after driving a short distance, or
comes back on again while driving,
take the vehicle to your dealer to
have it checked. With the indicator
on, the EPS may be off, making the
vehicle harder to steer.

1.

2.

3.

268

268

268

Instrument Panel Indicators

Vehicle Stability Assist
(VSA) System Indicator

VSA Activation Indicator

Electric Power Steering
(EPS) Indicator

Si and Canadian DX-G with manual
transmission models

62

09/07/02 16:36:35 31SNA640_067

Advertising
This manual is related to the following products: