HONDA 2010 Civic Sedan - Manual (Page 98)

CONTINUED
To remove a head restraint for
cleaning or repair, pull it up as far as
it will go. Push the release button,
then pull the restraint out of the seat-
back.
When reinstalling a head restraint,
put the legs back in place. Then
adjust it to the appropriate height
while pressing the release button.
Make sure the head restraint locks
in position when you reinstall it.
When a passenger is seated in the
rear center seating position, the
center head restraint should be
adjusted up or down, to match the
passenger’s height.
The head restraints adjust for height.
You need both hands to adjust a
restraint. Do not attempt to adjust it
while driving. To raise it, pull upward.
To lower the restraint, push the
release button sideways, and push
the restraint down.
Seats
Removing the Head Restraint
Adjusting the Head Restraint
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
95
Rear Center Position Front
RELEASE BUTTON SEAT-BACK
CUSHION
LEGS RELEASE BUTTON
SEAT-BACK
CUSHION
LEG
Failure to reinstall the head
restraints can result in severe
injury during a crash.
Always replace the head
restraints before driving.
09/07/02 16:42:31 31SNA640_100