Hunter Fan 44905 - Manual (Page 14)

44040-01 • 03/24/2010
14
6. Set the temperature for your heating cycle as indicated by the flashing ”Heat to” icon on your
screen. Use the and buttons to change the temperature and press
Next
.
7. You will be asked to set your cooling cycle, indicated by the flashing “Cool to”. Set this
temperature with your or buttons and hit
Next
.
8. The thermostat will start this process again for “Asleep”. Repeat steps 1-9 to schedule the
time and set the temperature for your sleep period. When finished pressed
Next
to get to “At
Home”
9. When setting “At Home”, you will only be asked to set a temperature. The thermostat
calculates your “At Home” time by what remains unscheduled from your “Away” and
“Asleep” periods. Set your “Heat To” temperature first and press
Next
, then Set your “Cool
To” temp and press
Done
To finish Scheduling your current day.
Note: You do not have to schedule all periods in order. Press any scheduled period
on the scheduling screen to bypass the others if you only need to make a single change
or you can press
Done
to exit.
5
Scheduling
Setting Your Schedule