Hunter Fan 44905 - Manual (Page 16)

44040-01 • 03/24/2010
16
5
Scheduling
Setting Your Schedule
10. When you have completed scheduling your day, you will be returned to the copy day
screen. The copy day screen will now show Copy
day to...
and ask you if you wish to copy the day
you just scheduled to any other days. Select Copy
day to...
and choose the days you wish to add the
schedule too. Press the
Cancel
button to ignore changes and return to the home screen, or
Done
to save changes and select a new day individually.
11. Select each day you wish to copy the schedule to by touching it on the screen directly. The
arrow indicators beside each day you select will show to indicate the day has been selected.
In figure 12 you will see Tue - Fri have been selected.
Note: The original day scheduled will not show on the screen as it is the one being
copied. You may use a pen or other small instrument to select the days if necessary.
12. Press
Done
on the screen and it will flash “Mon coppied to (days selected)”
and return you to the day select screen to program another day if any are left
unprogrammed. Repeat steps 3-12 until all days are scheduled. Pressing
Cancel
at
any time will return you to the home screen without saving changes.
Note: You can press the Turn
Schedule
at anytime while in Scheduling Mode to turn on or off
the scheduling.
13. Once all days are programmed, you will be taken back to the Home Screen. If
you need to make any changes, press the Schedule button to reenter schedule edit mode.
On Off