Hitachi CP-RX79 - Manual (Page 28)

19
1. Press the MAGNIFY ON button on the remote control. The
picture will be magnied, and the MAGNIFY dialog will appear
on the screen. When the MAGNIFY ON button is pressed for
the rst time after the projector is turned on, the picture will be
zoomed by 1.5 times. On the dialog, triangle marks to show
each direction will be displayed.
Using the magnify feature
2. While the triangles are displayed on the dialog, use the ▲/▼/◄/► cursor buttons
to shift the magnifying area.
MAGNIFY
ON/OFF
button
VIDEO DOC.CAMERA
KEYSTONE
ASPECT SEARCH BLANK
MUTE MY BUTTON
1 2
COMPUTER
MY SOURCE/
AUTO
MAGNIFY PAGE
UP
VOLUME
DOWN
࡯
ON
OFF
㧗
FREEZE
Operating
3. A magnifying glass icon will be displayed on the dialog when the MAGNIFY ON
button is pressed while the dialog with the triangles is displayed.
4. While the magnifying glass icon is displayed on the dialog, use the ▲/▼ cursor
buttons to adjust the magnication ratio. The magnication ratio will be adjusted
with ne steps. And changes in the ratio in single steps are subtle so they may be
hard to recognize.
5. Press the MAGNIFY OFF button on the remote control to exit magnication.
● The MAGNIFY dialog will automatically disappear in several seconds with no
operation. The dialog will appear again if the MAGNIFY ON button is pressed
when the dialog has automatically disappeared.
● While the MAGNIFY dialog is displayed, press the MAGNIFY ON button to switch
the dialog between magnifying area shifting (with the triangles) and magnication
ratio adjustment (with the magnifying glass icon).
● The magnication is automatically disabled when the displaying signal or its
display condition is changed.
● While the magnication is active, the keystone distortion condition may vary. It will
be restored when the magnication is disabled.
● Some horizontal stripes might be visible on the image while magnication is
active.