Hitachi CP-RX79 - Manual (Page 80)

8
VIDEO DOC.CAMERA
KEYSTONE
ASPECT SEARCH BLANK
MUTE MY BUTTON
POSITION
1 2
ESC
ENTER
MENU
RESET
COMPUTER MY SOURCE/
AUTO
MAGNIFY PAGE UP VOLUME
DOWN ࣮
ON
OFF
㸩 FREEZE
Connecting power supply
1. Put the connector of the power cord into the
AC IN (AC inlet) of the projector.
2.
Firmly plug the power cord’s plug into the
outlet. In a couple of seconds after the
power supply connection, the POWER indicator
will light up in steady orange.
Please remember that when the DIRECT POWER ON
function activated, the connection of the power supply
make the projector turn on.
Turning on the power
1.
Make sure that the power cord is rmly
and correctly connected to the projector
and the outlet.
2. Make sure that the POWER indicator is
steady orange.
3. Press the STANDBY/ON button on the
projector or the remote control.
The projection lamp will light up and the
POWER indicator will begin blinking in green.
When the power is completely on, the indicator
will stop blinking and light in steady green.
WARNING
►Please use extra caution when connecting the power cord, as
incorrect or faulty connections may result in re and/or electrical shock.
• Only use the power cord that came with the projector. If it is damaged, consult
your dealer to get a new one.
• Only plug the power cord into an outlet whose voltage is matched to the power
cord. The power outlet should be close to the projector and easily accessible.
Remove the power cord for complete separation.
• Never modify the power cord.
NOTICE ►
This product is also designed for IT power systems with a phase-to-
phase voltage of 220 to 240 V.
WARNING
►A strong light is emitted when the projector’s power is on. Do
not look into the lens of the projector or look inside of the projector through any
of the projector’s openings.
NOTE
• Please power on the projector prior to the connected devices.
• The projector has the
DIRECT POWER ON function, which can make the
projector automatically turn on. For more information, please see the “Operating
Guide” in the CD.
STANDBY/ON button
POWER indicator
Power cord
AC IN