Hitachi CP-RX79 - Manual (Page 51)

42
OPTION menu
Item Description
MY BUTTON
You can use this item to assign one of the following functions to the
BLANK
button on the control panel ( 5 ) and the MY BUTTON 1/2
buttons on the remote control ( 6 ).
(1) Choose a button to assign a function from BLANK, MY
BUTTON-1 and MY BUTTON-2. Use the ▲/▼ buttons to select
the desired button on the menu and press the ► button.
(2) Then using the ▲/▼/◄/► buttons sets one of the following
functions to the chosen button. Press the ENTER or INPUT
button to save the setting.
• COMPUTER IN: Sets port to COMPUTER IN.
• VIDEO: Sets port to VIDEO.
• INFORMATION: Displays the INPUT_INFORMATION ( 44) or
the SYSTEM_INFORMATION or nothing.
• MY MEMORY: Loads one of adjustment data stored ( 27).
When more than one data are saved, the adjustment
changes every time the MY BUTTON is pressed.
When no data is saved in memory, the
dialog "No saved data" appears.
When the current adjustment is not
saved to memory, the dialog as shown in
the right appears.
If you want to keep the current adjustment, please press
the ► button to exit. Otherwise loading a data will overwrite the
current adjusted condition.
• PICTURE MODE: Changes the PICTURE MODE ( 23).
• FILTER RESET: Displays the lter time reset conrmation dialogue
(
41).
• TEMPLATE: Makes the template pattern selected to the
TEMPLATE item ( 38) appear or disappear.
• RESOLUTION: Turns on/off the RESOLUTION dialog. ( 32)
• ECO MODE: Turns on/off the ECO MODE dialog. ( 33)
• BLANK: Turns on/off the blank function. (BLANK only)
• FREEZE: Turns on/off the freeze function. (BLANK only)
• AUTO: Performs the automatic adjustment function. (BLANK only)
MY SOURCE
U sing ▲/▼ buttons selects the picture input port to be selected with
pressing the MY SOURCE/DOC.CAMERA button on the remote
control.
Select the picture input that is connected with a document camera.
COMPUTER IN Ù VIDEO
(continued on next page)