Horizon Fitness LS 645E - Manual (Page 4)

BEFORE
YOU
BEGIN
6
INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ASSEMBL
Y
BEFORE
YOU
BEGIN
ELLIPTICAL OPERA
TION
LIMITED
W
ARRANTY
TROUBLESHOOTING
&
MAINTENANCE
CONDITIONING
GUIDELINES
BEFORE YOU
BEGIN
ASSEMBL
Y

INTRODUCTION
ELLIPTICAL OPERA
TION
CONDITIONING GUIDELINES
TROUBLESHOOTING &
MAINTENANCE
LIMITED WARRANTY
IMPORT
ANT
PRECAUTIONS
BOLT (A)
SPRING WASHER (B)
FLAT WASHER (C)
FRONT STABILIZER TUBE
FRONT STABILIZER COVERS
MAIN FRAME
SCREW (D)
BOLT (A)
SPRING WASHER (B)
FLAT WASHER (C)
SCREW (D)
REAR STABILIZER COVER
REAR STABILIZER
ASSEMBLY STEP 1
A) Open HARDWARE BAG FOR STEP 1.
B) Attach the FRONT STABILIZER TUBE to the MAIN FRAME using 2 BOLTS (A), 2 SPRING WASHERS (B) and 2
FLAT WASHERS (C).
C) Attach FRONT STABILIZER COVERS using 4 SCREWS (D).
D) Attach REAR STABILIZER COVER using 2 SCREWS (D).
BOLT (A)
20 mm
Qty: 2
SPRING WASHER (B)
18 mm
Qty: 2
FLAT WASHER (C)
20 mm
Qty: 2
SCREW (D)
Qty: 6
HARDWARE BAG FOR STEP 1 CONTENTS :
TOOLS INCLUDED PARTS INCLUDED
c
5mm Allen Wrench
c
6mm Allen Wrench
c
Phillips Screw Driver
c
13/15mm Flat Wrench
c
1 Console
c
1 Console Mast
c
1 Front Stabilizer Tube
c
2 Upper Handlebars
c
2 Lower Handlebars
c
2 Lower Link Arms
c
2 Top Covers
c
1 HORIZON FITNESS
12-Volt Power Adapter
c
4 Hardware Bags
c
2 Elbow Cover Sets
c
1 Rear Stabilizer Cover
c
2 Front Stabilizer Covers
c
2 Handle Bar Cover Sets
c
1 Water Bottle Holder
If you have questions or if there are any missing parts, contact Customer Tech Support.
Contact information is located on the back panel of this manual.
For a complete exploded diagram, visit us at www.horizonfitness.com
UPPER HANDLEBAR
MAIN FRAME
LOWER HANDLEBAR
LOWER LINK ARM
FRONT STABILIZER COVER
CONSOLE
GRIP PULSE
CONSOLE MAST
TOP COVER
PIVOTING FOOT PAD
PEDAL ARM
WHEEL COVER
WATER BOTTLE HOLDER
ELBOW COVER
REAR STABILIZER COVER
HANDLE BAR COVER
LS_645E_Rev.1.7.indd 6-7 6/25/08 10:43:25 AM