Maintenance – Husqvarna 16 H User Manual
Page 32
30
– English
Lubrication
The following two lubrication points should be
regularly lubricated with high quality graphite
grease.
With daily use lubrication should be conducted
twice a week.
General lubrication
All joints and bearings are lubricated on manufac-
ture with molybdenum sulphide grease. Re-grease
with same type of grease. Lubricate the steering
and control wires with engine oil.
The machine should be lubricated regularly, and
twice a week when used daily.
Checking the tyre pressure
The tyre pressure should be 60 kPa (0.6 kp/cm
2
) all
round.
To improve driving the pressure on the rear tyres
can be reduced to 40 kPa (0.4 kp/cm2).
The maximum tyre pressure is 100 kPa (1.0 kp/cm
2
).
IMPORTANT INFORMATION
Different tyre pressures on the front tyres
will result in the blades cutting the grass
at different heights.
MAINTENANCE