HP PROLIANT 56976839 - Manual (Page 8)

Issue:
HP NAS Updater installed in previous Service Releases cannot be used to install Service Release
6.6
Description
The HP NAS Updater installed with previous Service Releases cannot be used to
launch Service Release 6.6. Attempting to install Service Release 6.6 with the
older utility might result in the error message Version of NAS Updater on
this system does not support installation.
Please install
latest version of NAS Updater
.
Workaround Install the HP Service Release Wizard bundled with Service Release 6.6 by running
the setup.exe file located at the root level of the Service Release.
Issue: Some ROM Flash components not checked for installation by Service Release Wizard
Description
Some ROM Flash components are not checked for installation in the Component
Updates Selection screen of the Service Release Wizard. A check indicates the
Service Release has a more recent version of the component compared to the
installed version on the system.
The issue applies to the following ROM Flash components:
• DL100 G2 BIOS Update
• HP NC-Series Broadcom Online Firmware Upgrade Utility for Windows Server
2003
• HP NC-Series Broadcom Online Firmware Upgrade Utility for Windows Server
2003 x64 Editions
• HP BladeSystem c-Class Onboard Administrator Firmware Component
• ROM Flash for iLO
• ROM Flash for iLO (Japanese)
• ROM Flash for iLO2
• ROM Flash for iLO2(Japanese)
• ROM Flash Component for Windows - Smart Array P400 and P400i
• ROM Flash Component for Windows - Smart Array P600
• ROM Flash Component for Windows - Smart Array P800
• ROM Flash for Smart Array 641/642
• ROM Flash for Smart Array 6400
• ROM Flash for Windows - MSA20
• HP 6-port SATA RAID Controller Firmware Update (Note: files are extracted
to C:\SP30558)
• Firmware and BIOS for HP SATA HBA with RAID (Note: files are extracted
to C:\SP34281)
Workaround
When a check is supplied by the user for applicable ROM Flash components
listed above, the Service Release Wizard will install the ROM Flash component
supplied with the Service Release. The underlying ROM Flash component installer
determines whether the installed version of the component will be updated or not.
Refer to the cpqsetup.log located at C:\CPQSYSTEM\log to verify the installation
status of the ROM Flash component.
NOTE:
Some ROM Flash components may not be applicable to your system.
Issue: Network drive letter path does not work with the Service Release Wizard
Description
The HP Service Release wizard can show an error indicating failure in locating
components when a network share is mapped to a drive letter.
Workaround Provide the complete network UNC path of the HP Service Release component.
Issue: HP Service Release Wizard does not automatically start after installing the prerequisites
8