HTC Touch HS S00 - Manual (Page 87)

1 Getting Connected Getting Connected 1
To add a new GPRS/3G connection
In times when you need to add another GPRS/G connection on your
device, obtain the Access point name from your wireless service provider.
Also, check if a user name and password are required.
1. Tap Start > Settings > Connections tab > Connections.
2. Under My ISP, tap Add a new modem connection.
3. On the Make New Connection screen, enter a name for the
connection.
4. In the Select a modem list, select Cellular Line (GPRS , 3G), then tap
Next.
5. Enter the Access point name, then tap Next.
6. Enter the user name and password, only if required.
7. Tap Finish.
Notes • To view help information for any screen, tap the help icon ( ).
• To modify your connection settings, tap Manage existing connections
on the Connections screen, and complete the connection wizard.
Note If you choose a Country and/or Operator that is different from the
installed SIM card network operator, you may not be able to access
network services.
3. Tap OK.
4. The next message that appears prompts you to confirm whether you
want to configure the data connection settings based on the selected
network. Tap Yes.
Connection Setup then configures the data connection settings.
5. After the Connection Setup completes the configuration, tap Restart.
10.3 Ways of Connecting to the Internet
Your device’s networking capabilities allow you to access the Internet
or your corporate network at work through wireless and conventional
connections. You can connect to the Internet through one of the following
connections:
• GPRS, EDGE or G
• Dial-up
Note You can also add and set up the following connections:
• VPN: A VPN connection is used to access your corporate network by using
an existing Internet connection.
• Proxy: A Proxy connection is used to access the Internet using an existing
connection to your corporate or WAP network.
10.4 GPRS/3G
Use GPRS/3G (or EDGE, if available) to connect to the Internet and to send
and receive picture messages on your device. You will need a data plan
to use your wireless service provider’s GPRS/G network. Check with your
wireless service provider to find out about GPRS/G rates.
GPRS/G settings are already preconfigured on your device, and your device
is ready to use your wireless service provider’s GPRS/G services. Do not
change the settings as this may cause services to stop working.