Husqvarna Rider 11 - Manual (Page 19)

English –
17
1
2
3
STOP START
1
2
3
6007-004H
6007-005H
6007-006
DRIVING
Cold engine:
4. Push the throttle control to position 3 (choke
position). In this position the engine receives a
richer mixture so that the engine starts more
easily.
IMPORTANT INFORMATION
Do not run the starter for more than about
5 seconds at a time. If the engine does not
start, wait about 10 seconds before trying
again.
6. Turn the ignition key to start position.
Warm engine:
5. Set the throttle control midway between position
1 and 2.