Husqvarna Rider 11 - Manual (Page 32)

30
– English
R I D E R
8 5 0
R I D
E R
8 5 0
6008-030
6008-006
Checking the tyre pressure
The tyre pressure should be 60 kPa (0.6 kp/cm 2 ) all
round.
To improve driving the pressure on the rear tyres
can be reduced to 40 kPa (0.4 kp/cm
2 ).
The maximum tyre pressure is 100 kPa (1.0 kp/cm 2 ).
IMPORTANT INFORMATION
Different tyre pressures on the front tyres
will result in the blades cutting the grass
at different heights.
MAINTENANCE
Check the engine’s cooling air intake
Raise the engine cover.
Check that the cooling intake is free from leaves,
grass and dirt.
If the cooling intake is blocked this will interfere with
the cooling of the engine, which can damage the
engine.