Husqvarna Rider 11 - Manual (Page 3)

English –
1
Operator’s Manual for
Rider 11 and Rider 13
Rider 11 Bio and Rider 13 Bio
CONTENTS
Introduction ......................................................... 2
Driving and transport on public roads .............. 2
Towing .............................................................. 2
Use ................................................................... 2
Serial number ................................................... 3
Explanation of symbols ...................................... 4
Safety Instructions .............................................. 5
General Use ..................................................... 5
Driving on Slopes ............................................. 7
Children ............................................................ 8
Maintenance .................................................... 8
Transport .......................................................... 9
Presentation ...................................................... 11
Location of the controls .................................. 11
Throttle/Choke lever Rider 11/11 Bio ............. 12
Clutch pedal Rider 11/11 Bio .......................... 12
Brake pedal/Parking brake Rider 11/11 Bio ... 12
Throttle/Choke lever Rider 13/13 Bio ............. 13
Speed limiter Rider 13/13 Bio ........................ 13
Parking brake Rider 13/13 Bio ....................... 13
Cutting unit ..................................................... 14
Lift lever for cutting unit .................................. 14
Lever for adjustment of cutting height ............ 15
Seat ................................................................ 15
Fuelling .......................................................... 15
Driving ................................................................ 16
Before starting ................................................ 16
Starting the engine ......................................... 16
Driving the machine ....................................... 16
Cutting tips ..................................................... 19
Stopping the engine ....................................... 20
Drive disengagement lever ............................ 20
Maintenance ...................................................... 21
IMPORTANT INFORMATION
Read through these instructions carefully
so that you know how to use and maintain
the machine before using it.
For servicing other than described in this
manual contact an authorised dealer for
parts and service.
Maintenance schedule ................................... 21
Dismantling of the machine hoods ................. 22
Checking and adjusting the steering wires .... 24
Checking and adjusting the brakes ................ 25
Checking and adjustment of throttle wire ....... 26
Replacement of fuel filter ............................... 26
Replacement of air filter ................................. 25
Checking the fuel pump’s air filter .................. 28
Checking the battery acid level ...................... 28
Ignition system ............................................... 28
Checking the safety system ........................... 29
Checking the tyre pressure ............................ 30
Checking the engine’s cooling air intake ........ 30
Checking and adjusting the cutting unit
ground pressure ............................................. 31
Checking the parallelism of the cutting unit ... 31
Adjusting the parallelism of the cutting unit .... 32
Service position for BioClip 90 ....................... 33
Checking the blades ...................................... 36
Replacing the break-pin ................................. 36
Changing the oil ............................................. 37
Lubrication ......................................................... 37
Checking the engine’s oil level ....................... 37
Checking the transmission’s oil level ............. 38
Lubricating the belt adjuster ........................... 38
General lubrication ......................................... 38
Lubrication of front wheel bearings ................ 39
Trouble shooting schedule .............................. 40
Storage ............................................................... 41
Winter storage ................................................ 41
Service ........................................................... 41
Technical data ................................................... 42
EU declaration of conformity ........................... 44