Hunter Fan 43665 User Manual
Page 23
2
Step 4
■ Press again to change to the program temperature. The current
temperature will be flashing.
■ Press to change the temperature.
Step 5
■ Press to select Auto or On for each program. “Auto” will automati-
cally cycle your system to maintain your set temperature. “On” will
run your system continuously. “Auto” is the default setting.
Step 6
■ (Does not apply to thermostat model 44660) Press to select the
sensor that will control each thermostat program, either for
sensor , for sensor 2, or for the thermostat. The ther-
mostat can also be configured to take an average of any combina-
tion of the three.
Step 7
■ Press again to move to the next program number.
■ Repeat Steps through 5 to change the remaining Weekday programs.
or
program
program
fan
sensor
1
2